How the original system worked
The ActiveWave system had three kinds of hardware: tags, readers and field generators. Software on a Windows host computer tied them together. Each part has its own page, with its files in the TigeRFID repository and its datasheet where one survives.
Tags
A tag was a small battery-powered radio, fixed to an asset or worn by a person. It slept most of the time. A wake-up command on 433 MHz woke it. It answered with its ID and other data on 916, 927 or 868 MHz, depending on the model.
A tag could also wake on its own timer and check in. When a tag missed its check-in, the host could raise an alarm, so that someone looked into the loss at once. Many tags could answer at the same time, and every packet carried a check that caught damaged data.
The sealTag, from 2012, worked differently. It was a seal with no radio like the other tags'. It logged the moment someone opened its band, and a 13.56 MHz reader collected the record later.
Readers
A reader listened for tags and passed what it heard to the host computer as it arrived. It sent on one frequency and listened on another, so it could do both at once. A reader could also call tags itself, and the Standard Reader could open doors and set off alarms through its relay outputs.
Field generators
A field generator sent the 433 MHz wake-up command to the tags near it. Placed inside a reader's range, it marked out a zone around itself. A tag's reply could name the field generator that woke it, so the host knew which zone the tag was in.
A field generator could call tags on a schedule or when a motion sensor tripped. It could call every tag, one type of tag or one tag by its ID. The Standard Field Generator only transmitted. The Smart Field Generator also talked to its reader by radio.
Setting tags up, and trying the system
The Programming Station Reader wrote each tag's ID and settings before use. The Demo Kit put a reader, a field generator, a motion detector, nine tags and the software in one box.
The software
The host software kept track of tagged people and assets, raised alarms and could drive a reader's relays. A programming interface let people write their own software for the hardware.
Building one today
Nobody has rebuilt the original hardware recently, so the files these pages link may not make a working unit as they stand. Nothing on this site says a rebuild may transmit on these frequencies as they are. Radio rules differ by country, and the TigeRFID project checks them before it chooses a rebuild's radios.
Sources:
- the datasheets each product page links;
- the readme files of the TigeRFID repository at its activewave-2018 tag;
- the TigeRFID project's study of the original system.